If you are planning to go roller-skating, decide on what type of roller blades you are going to buy. The very first thing to think of is deciding where you are planning on skating, inside of the roller rink, or outside on the streets. We had to mention this, as there is a difference between outdoor and indoor roller blades.
Outdoor roller blades have softer wheels than indoor ones. It is because the softer wheel absorbs more vibration when you are rolling over the rough pavement. The softer wheels with a rough pavement will give you a sweet ride.
The boots on both roller blades, for inside and outside, is either low cut or high cut. In other words, the roller blades are pretty much similar, exception making the wheels. You could buy an extra set of wheels for your roller blades, and make them for the outside or inside, just by swapping them. However, this may be difficult as you would have to pull some bearings, and you would need to get an extra set of bearings, which would make it more difficult for you and it would also not save you time.
Regardless of what skates you make a decision to use you need to determine just what bearings you would like your new skates to include. A roller-skate bearing is an anti-friction gadget that is introduced on both sides of the wheels with an axle via the center (bearings usually do not include axles), they make the wheels move. Each and every wheel needs 2 bearings; the axle is placed in between which is held fixed with bolts to the skate-frame.
Bearings utilize an “ABEC” score to determine the quality of the bearing. ABEC rankings are from ABEC 1 to ABEC 9; ABEC 9 remaining the best one. This ranking does not determine the speed of the bearing but instead the quality along with the smoothness of the ride; ABEC 7’s are a more smooth roll when compared with ABEC1. Irrespective of what you are a novice or the most improved you would like to stay with at least an ABEC 5 bearing.
You can check out: best outdoor roller skates